Automatic 3 in 1 Drinking Water Washing Filling Capping Machine
This washing filling capping machine is mainly used for Non-aerated carbon dioxide drink, such as mineral water, pure water and so on.The machine design is shorten the time for the drink material contact with outside, Increase the sanitation condition throughout economy benefit.
*Using the wind sent access and move wheel in the bottle directly connected technology; canceled screw and conveyor chains, this enable the change the bottle-shaped become easier.
* Bottles transmission adopt clip bottleneck technology, bottle-shaped transform not need to adjust the equipment level, only change related the curved plate, wheel and nylon parts is enough..
* The specially designed stainless steel bottle washing machine clip is solid and durable, no touch with the screw location of bottle mouth to avoid secondary pollution.
*High-speed large gravity flow valve filling valve, filling fast, filling accurate and no liquid lose.
*Spiraling decline when output bottle, transform bottle shape no need to adjust the height of conveyor chains.
*Host adopt advanced PLC automatic control technology, the key electrical components from famous company such as Japan's Mitsubishi, France Schneider, OMRON.
Washing part of water filling machine
1. Stainless steel 304/316L washing heads.
2. Using unique design,avoid the traditional bottle on rubber clip to block the bottle threaded parts may be caused by the pollution.
3. Washing pump is made of stainless steel.
4. By high spray nozzle, blunt bottle of water jet angles, flush to the bottle of any part of the inner wall, rinse with water thoroughly and save flush bottle.
5. Bottle clamp and flip agencies sliding sleeve adopts Germany igus corrosion resistant bearing without maintenance.
Filling part of water filling machine
1. Filling method for gravity filling.
2. Filling valve manufactured SUS 304/316L.
3. High precision, high speed liquid filling.
4. Filling move by the rack drive system through gear transmission.
5. Hydraulic cylinder controlled by a float liquid level.
6. Using the latest double guide pillar type bottle of lifting mechanism, avoid the bottle of elevating the old products must be through the mesa caused by leakage on the edge, at the same time, easy installation and maintenance.
Capping part of water filling machine
1.Automatic check,no bottle no capping.
2.Capping heads in stainless steel 304/316L.
3.Capping heads stop working when lack of bottle.
4.Fall guy guide sets out to prevent the cover through and cover on the body, at the same time equipped with a set of photoelectric switch, automatic stop when lighted cover rail without cover machine, can effectively avoid the occurrence of open bottle.
5.High efficiency centrifugal principle.
|
Model
|
SHPD 14-12-5
|
SHPD 18-18-6
|
SHPD 24-24-8
|
SHPD 32-32-8
|
|
Station Number
|
Washing 14
|
Washing 18
|
Washing 24
|
Washing 32
|
|
Filling 12
|
Filling 18
|
Filling 24
|
Filling 32
|
|
|
Capping 5
|
Capping 6
|
Capping 8
|
Capping 8
|
|
|
Production Capacity
|
5000BPH(500ml)
|
8000BPH(500ml)
|
12000BPH(500ml)
|
15000BPH(500ml)
|
|
Way Of Filling
|
Gravity Filling
|
|||
|
Bottle Size
|
Diameterφ50－φ105，Height165－320
|
|||
|
Pressure
|
0.7Mpa
|
|||
|
Air Consumption
|
0.8M3/min
|
|||
|
Pressure Of Washing
|
0.2-0.25Mpa
|
|||
|
Washing Water
|
1.0Ton/hour
|
1.2Ton/hour
|
1.5Ton/hour
|
2.0Ton/hour
|
|
Total Power
|
1.5KW
|
2.2KW
|
2.2KW
|
3.0KW
|
|
Dimensions(MM)
|
2250*1650*2650
|
2850*2150*2750
|
2880*2180*2750
|
3380*2580*2750
|
|
Machine Weight
|
3500KG
|
3500KG
|
3500KG
|
3500KG
|
